Īny password will do, as this should only be temporary. After startup the machine will not be able to connect the SSD drive. Certain variants of Lenovo's BIOS are susceptible to use a deviating algorithm for calculating the encryption key.

Warning: Do not reboot your computer after this step, particularly if you have a Lenovo laptop.

Skip step 2, and go directly to Step 3 below.The drive will remain locked but not frozen. When prompted for the password by Dell Security Manager, press Escape rather than entering it.Set the Internal HDD Password in the BIOS (be careful, the keymap is en_US / qwerty).Reboot into the Dell BIOS by pressing F2 on startup.If the command output shows 'frozen', you may be able to work around it by: Using a USB-to-SATA adapter is an option if it supports hotplugging. If hot-(re)plugging of SATA cables still crashes the kernel, make sure that AHCI is enabled in the BIOS (AHCI allows hot-(re)plugging operations without a crash). If hot-(re)plugging the SATA data cable crashes the kernel try letting the operating system fully boot up, then quickly hot-(re)plug both the SATA power and data cables. If unsuccessful, one can try hot-(re)plug the data cable (which might crash the kernel). Upon waking up, it is likely that the freeze will be lifted. Some BIOSes block the ATA Secure Erase command by issuing a 'SECURITY FREEZE' command to 'freeze' the drive before booting an operating system.Ī possible solution is to simply suspend the system. If it shows as just 'frozen' then you cannot continue to the next step.

In the security section of the output it should say 'not frozen'.

Step 1 - Make sure the drive security is not frozen Note: The following information has been taken from the official ATA wiki page.

Erase ssd